bone: scapula

Contents

1 Image: Scapula costal and dorsal (link to two linkmaps)
2 Scapula
3 Movements
4 Joints
5 Pictures

Image: Scapula costal and dorsal (link to two linkmaps)

Scapula

The connection between the scapula and the rib cage is not a true joint, especially as the bones do not articulate directly and therefore lack cartilage coverings. It is therefore referred to as the scapulothoracic gliding joint, as the scapula glides on the two serratus anterior(ventral, i.e. more profound, on the rib side) and subscapularis (dorsal, i.e. more superficial, originating on the costal side of the scapula ) muscles, which lie in front of the ribs on their ventral/costal side. The scapula articulates with the humerus of the upper arm in its articular surface called the glenoid. The scapula can move freely in three dimensions on the back.

Surfaces

Facies dorsalis

The spina scapula divides the dorsal surface of the scapula into a small superior part with the supraspinous fossa, in which the supraspinatus originates, and a large inferior part, which largely serves as the origin of the infraspinatus. Laterally, diagonally between the lateral and inferior angles, there is a bony ridge that separates the large medial origin area of the infraspinatus from that of the greater(inferior) teres and above that of the lesser teres.

Supraspinous fossa

The supraspinous fossa is the fossa above the spina scapulae and in front of the superior margo of the scapula, in which the suprapinatus, which extends laterally over the humeral head, originates.

Facies costalis / ventralis

The facies costalis contains an extensive fossa, the subscapularis fossa, in the superior two-thirds of which the subscapularis originates. The serratus anterior inserts in triangular areas in front of the angulus inferior and angulus superior.

Fossa subscapularis

Extensive pit in the facies costalis, in the superior two-thirds of which the subscapularis originates.

Margins

Margo superior

Between the superior angulus and the base of the coracoid process lies the superior margo, in which the incisura scapulae covered by the lig, transversum scapulae superius lies. The base of the omohyoid muscle borders the incisure.

Margo lateralis / axillaris

The lateral margo lies between the glenoid cavity and the inferior angulus. Below the glenoid lies the infraglenoid tubercle, from which the caput longum of the triceps originates.

Margo medialis / vertebralis

The margo medialis, to which several muscles attach, lies between the superior angulus and the inferior angulus:

The first of these three pull medially towards the margo medialis of the scapula and thus cancel out external rotation, at the same time pulling it cranially and thus elevating it. The serratus anterior coming from the lateral, on the other hand, is part of the scapulothoracic gliding bearing and pulls the scapula into protraction.

Angles / corners

Angulus inferior (shoulder blade)

The margo medialis and margo lateralis meet at the lower tip of the shoulder blade, the angulus inferior. During external rotation it moves recognizably and palpably laterally and during elevation recognizably and palpably cranially and therefore represents a good point of orientation. The teres major and some fiber tracts of the latissimus dorsi are located on the dorsal side.

Angulus superior

Margo medialis and margo superior meet at the angulus superior. Fibers of the levator scapulae insert here.

Angulus lateralis

A cavitas glenoidalis, a flat cartilage socket in which the humerus articulates, lies far superior to the more massive angulus lateralis, the junction of margo lateralis and margo superior. Above this lies the supraglenoid tuberosity and below it the infraglenoid tuberosity.

Distinctive structures

Spina

The spina of the scapula is the far superior, largely transverse and medially caudally running scapular ridge, above which the supraspinatus arises (giving it its name) in the supraspinatus fossa, and below which the infraspinatus arises over a large area.

Glenoid / glenoid cavity

The glenoid is the articular surface of the shoulder blade in which the humerus(upper arm bone) articulates. The vertical diameter is larger than the horizontal diameter. As the articular surface is very small and relatively flat in order to achieve the greatest possible range of movement, it is surrounded by a labrum (a cartilage lip), to the upper part of which fibers of the tendon of origin of the caput longum of the biceps attach. The main part of the tendon attaches directly above to the supraglenoid tubercle. Because of this connection, the glenoidlabrum is often also affected when the tendon of origin is torn, which is referred to as a SLAP lesion. It is caused, for example, by injuries caused by extreme loads, such as those that can occur when catching heavy objects, through trauma or in opponent contact situations in sport, when the biceps are jerkily loaded in a powerful eccentric contraction. A SLAP lesion can also occur as a result of repeated microtrauma in the sense of overuse.

The shoulder joint can dislocate more easily than other joints due to the extreme ratio of the small, fairly flat articular surface of the glenoid and the large humeral head:

in 95-97% anteriorly (arm extended dorsally during a fall dislocates anteriorly)
in 2-4% after posterior(cramp, electrical accident, which is often overlooked as a cause)
in 0.5% to inferior (fall on the frontally abducted arm)
A superior dislocation is not possible because the acromium stops the movement of the humerus.

Below the glenoid lies the infraglenoid tubercle, from which the caput longum of the triceps originates.

Glenoidlabrum

The glenoidlabrum is the cartilaginous lip that surrounds the glenoid at its edge and gives the shoulder joint additional stability. It is designed primarily for three-dimensional flexibility with a large ROM, which makes a small and flat glenoid necessary, but which must be given additional stability through additional measures (such as muscular support from the rotator cuff) and the labrum glenoidale cartilage lip. A fundamentally similar construction in the sense of a ball-and-socket joint at the end of the trunk at the base of the limb is found in the hip joint, which is also designed for a rather high degree of three-dimensional flexibility, but in addition to a cartilage lip(labrum acetabuli) has a robust ligamentous apparatus due to the large partial body weight to be supported and whose mobility is reduced in favor of stability; it is also referred to as a nut joint due to the more than full coverage of the caput femoris by the acetabulum. Connected to the glenoidlabrum are fibers of the tendon of origin of the long head of the biceps brachii. In overload situations, not only an avulsion is therefore possible, but often also a tear of the biceps anchor at the cartilage lip.

Biceps anchor

The origin of fibers of the tendon of the long head of the biceps brachii at the superior part of the glenoidlabrum (upper cartilage lip) of the glenoid (glenoid surface with the humerus) is referred to as the biceps anchor. This area of the cartilage can tear or be partially torn off, particularly as a result of extraordinary tensile stress; this is known as a SLAP lesion.

Processus coracoideus (coracoid process)

the ventrally protruding process on the outer upper scapula, slightly medial and caudal to the acromion, from which the pectoralis minor and the caput breve of the biceps brachii and the coracobrachialis originate in a common tendon. The main function of the muscles that originate there is to abduct the arm frontally and depress the scapula. The coracoacromial ligament and the coracoclavicular ligament also insert at the coracoid process.

Acromion

The acromion is the shoulder level, the outermost area in the upper shoulder blade, still above the glenoid. The deltoid pars acromialis arises laterally from the superior surface of the acromion, and the joint with the clavicle, the acromioclavicular joint (ACJ ), is located far medially.

Infraglenoid tubercle

Protrusion located below the glenoid, where the caput longum of the triceps originates.

Supraglenoid tubercle

Protrusion located above the glenoid, from which the caput longum of the biceps originates.

Movements

Protraction / retraction: the movement away from the spine to the side-front (protraction) or to the back-inside(retraction) of the spine
Elevation / depression: the cranial lifting(elevation) or caudal lowering (depression) of the shoulder blade.
Rotation: with its lower tip(angulus inferior) pointing outwards and upwards (external rotation) or back again (internal rotation). To raise the arm above 90°, the scapula must externally rotate; when the arm is lowered, the external rotation is reversed.

This means that the scapula has three main dimensions of movement. Pathologically, especially in the case of weakness of the retractors such as the rhomboids, and also in the case of weakness of the protractors such as the serratus anterior, which together press the scapula onto the thorax, it can perform a tilting movement that lifts it away from the back, which can be clearly seen in the various forms of scapula alata (see Wikipedia).

Joints

Acromioclavicular joint

The acromioclavicular joint is the joint in which the scapula articulates with the clavicle, see acromioclavicular joint.

Glenohumeral joint

The glenohumeral joint is the joint in which the scapula articulates with the humerus, the shoulder joint, see under shoulder joint.

Scapulothoracic bearing

The serratus anterior( lyingventrally, i.e. more profound, on the rib side) attaches to the ventral inner edge(margo medialis) of the scapula. The subscapularis originates on the costal side of the scapula. These muscles therefore lie directly on top of each other and at the same time between the thorax and scapula. They form the scapulothoracic gliding bed in which the scapula glides on the fasciae of the muscles and the thorax.

yogabook